Hello, can any user of this graphic card post here his 3d settings? I tried with many combinations, many drivers and i just can't play smoothly in css, worst thing is when i move left or right with mouse - the line in the middle of monitor is lagging. Thanks for any help
Whats your cpu? CSS is CPU intensive. I don't have that GPU but try these settings;
AA - off AF 16x Image Quality - High Quality Conformant Texture Clamp - OpenGL Force mipmaps - Bilinear Pre-Rendered Frames - 3 Negative LOD Bias - Allow Threaded Optimization - Auto Vsync OFF
You really shouldn't have a problem with CSS though. My old Single Core 4000+ and 7900GS would get me 40-120 fps, 1280 x 1024 Everything High, no AA or AF.
I played on just installed windows on new hard disk, lastest drivers so this isn't a problem. And Dev-Jinx, what do u mean by saying "CPU is das probleme." ?
I don't personally have an AMD system. From what I have read, the following are average temps for such a processor:
AMD Athlon64 65C - 70C
70-80 does seem slightly hot, but that's probably better left to be answered by someone with an AMd system. In my experience with AMD systems, most overheating systems will just shut off, rather than slow down, due to the fact that they don't throttle the multiplier when overheating.
I have one under my desk here at work right now which did the very same.
This comment was edited at 05/22/2008 9:47 AM
Studying - Microsoft Certified IT Professional Server Administrator
AF- Off Antialiasing- Applicatin controlled conformant texture clamp- Use hardware Gamma correct Antialiasing- Off Hardware acceleration- single display performance mode Texture filerting- Perfomance Tripple buff- Off Vscync- Force off
Driver: 94.24
EDIT: i got a Tagan 420W
19LCD 8ms responce i think, everything is smooth as.
This comment was edited at 05/22/2008 4:41 PM
You gotta be carefull because brawwr will awp your face off.
7950 gx2 help
AA - off
AF 16x
Image Quality - High Quality
Conformant Texture Clamp - OpenGL
Force mipmaps - Bilinear
Pre-Rendered Frames - 3
Negative LOD Bias - Allow
Threaded Optimization - Auto
Vsync OFF
I tried these and still the same :/ and i have with this card 50-80 fps now with high fps cfg.
I tried playing with only one gpu enabled, but it wasn't big difference
Defrag/Drive Cleaner
Overheating?
Updated drivers?
You really shouldn't have a problem with CSS though. My old Single Core 4000+ and 7900GS would get me 40-120 fps, 1280 x 1024 Everything High, no AA or AF.
And Dev-Jinx, what do u mean by saying "CPU is das probleme." ?
AMD Athlon64 65C - 70C
70-80 does seem slightly hot, but that's probably better left to be answered by someone with an AMd system.
In my experience with AMD systems, most overheating systems will just shut off, rather than slow down, due to the fact that they don't throttle the multiplier when overheating.
I have one under my desk here at work right now which did the very same.
What is your Power Supply btw?
I thought this effect may be caused by my monitor, it has response time 8ms.
Awmagwd can you post your 3d settings and what display driver u have installed? I would be very grateful, maybe it will help
Antialiasing- Applicatin controlled
conformant texture clamp- Use hardware
Gamma correct Antialiasing- Off
Hardware acceleration- single display performance mode
Texture filerting- Perfomance
Tripple buff- Off
Vscync- Force off
Driver: 94.24
EDIT: i got a Tagan 420W
19LCD 8ms responce i think, everything is smooth as.
Edit: It worked, now everything runs smoothly, thank you all for help ^^
Submit Comments
Registered Users Only
In order to post comments, you must be a registered member. If you have not registered, it's free and easy!