GotFrag Hardware Forums

Forums Home > Competitive Gamers > Mice, Keyboards and Mouse Pads

Deathadder Starting to Skip

My DeathAdder just started skipping all the time on my Exactmat speed side. I never have used the drivers, could the drivers be the solution? is something wrong with the mouse itself? Also I'm thinking about getting a QCK+ is there issues with this pad and the deathadder?

Thanks.

Tried cleaning it?

I used it on the exactmat without issues, and now i use the QCK+ and i like it better, works fine.

Worlds best CSS DeathMatch server! :) -- 1000 fps Hi-Def -- 69.65.39.36:27015

Well yeah, cleaning the mat and the lens could help.

Or you could try updating the firmware.

YO i had the same problem and i just turned the mousepad around and it works better...i think the top of my qck+ is a little worn out after 6 years so i use it upside down and it works alright...just fool around with it...clean the lens, brush all debris off the pad, like baked lays or any bodily fluids you might have secreted onto the pad and clean the deathadders lens and you should be good to go

lunatic hai oversoul is straight up nasty

I believe deathadder works best on cloth.

make sure you clean your mouse'/mousemat every three weeks or so here's how:
ExactMat: Use warm mild soap and cloth to wipe the surface.
DeathAdder Palm Area: http://www.razersupport.com/index.php?_m=..
DeathAdder Sensor: http://www.razersupport.com/index.php?_m=..

This comment was edited at 07/20/2008 1:18 PM

!@#tUQue

Hey guys thanks for the posts. Im gonna try cleaning the lens and the mat and see if it works better. If it doesn't them i'm gonnna pick up a QCK.

theres this thing called tech support. they have it for a reason.

System: RTU -- http://gotfrag.com/portal/files/862/

Submit Comments

Registered Users Only

In order to post comments, you must be a registered member. If you have not registered, it's free and easy!